Design points

Put in order

Because in the locker room into the closet with open form, all the clothes are exposed, it is easy to out of order, a mess. Therefore, Tang boards are reasonable,

Cloakroom

You can split before the Tang plate, a full analysis on the size of objects, including length, body weight, etc., which are commonly used, which is an alternate, who are placed above, who are placed below, placed her convenience, and so on and so on, and then, according to the analysis, create objects frame segmentation map.

Hardware parts

These hardware is an important part of the quality assurance, if only the figure of a moment cheaper, it will cause trouble in the future maintenance.

Keep a good size

The size of the cabinet and the surrounding wall is best to set aside at least 5 cm margin, easy field installation, the so-called seamless is actually a misunderstanding.

Moisture treatment

Most architectural design will be placed in the storage room and the kitchen and bathroom close to the place, at least one side wall is the case, if the owner of the lockers belong to this category, moisture problems is especially important. First, in the proximity of the toilet or kitchen to do a good job in water, and then, in the use of the process, in the kitchen to put some moisture.

Consider environment

As the saying goes: the world is not the best, only the most suitable. In the decision to do before entering a cloakroom, the owner should analyze its external environment is suitable for a walk-in dressing room, such as whether there is room in the road, whether it is a double balcony window, if there is a problem between the balcony and the room door.

Space problem

The wardrobe usually has two kinds: one kind is carved out of the building itself, one is by their own or designer, re partition space is divided out, in fact, the latter does not need a large space, enough on the line. Some usually do not how to wear clothes, it is best not to take up space, after finishing them all please go out, this is the best embodiment of the active space.

Corner problem

Most buyers will think this design is very beautiful, but because this structure needs to use a lot of material, see the price after some buyers spit tongue.

Some are mistaken "corner cabinets save more space", after the discussion to understand because of restrictions on the making, corner cabinets need much space, lack of existing locker room space, after barely into the corner cabinet, the dressing room space with the original idea of great difference.

Open a corner cabinet body, if not rotating collocation basket using is not convenient.

That does not tell us not to do corner cabinet, a proper design can increase the space changes, see everyone's preferences, budget and space, not only consider corner cabinet ignored other problems. The following is the surface of a wall hanging plate rack to replace the corner cabinet, to reduce the budget to increase the use of elastic "objective. The left corner counter is 3 times more than the right, but the volume is exactly the same!

Do you need a door in the changing room?

Many people will be in doubt: the wardrobe is not easy to stick the dust. That's right, but:

The locker room is usually a separate room with a door, the switch a door should be more than the opening of several wardrobe door.

Cabinet door for money, the budget will be more than 25% higher than no door

Some of the more humid environment need to dehumidify, no doors open the locker room as long as the dehumidifier can dehumidification, when the door to the door, the door will open all the drawers, corner cabinet over the fight, can only open a door.

A lot of dust places, mounted on the door is not necessarily useful, can consider to set a transparent plastic bag (the laundry washing will set of plastic bags.